PLANET IP30 INDUSTRIAL 8-PORT 100/1000T + 2-PORT SFX

MODEL: PLANET IGS-1020PTF INDUSTRIAL 8-PORT 10/100/1000T 802.3AT POE + 2-PORT 100/1000X SFP ETHERNET SWITCH (-40~75 DEGREES C) FEATURES PHYSICAL PORT * Eight 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3af/at PoE+ Injector (Ports 1 to 8) * Two 100/1000BASE-X SFP slots for SFP transceiver type auto detection (Ports 9 to 10) POWER OVER ETHERNET * Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE * Backward compatible with IEEE 802.3af Power over Ethernet * Up to 8 ports of IEEE 802.3af/802.3at devices powered * 240-watt PoE budget * Supports PoE power up to 30 watts for each PoE port * Auto detects powered device (PD) * Circuit protection prevents power interference between ports * Remote power feeding up to 100 meters INDUSTRIAL CASE AND INSTALLATION * IP30 metal case * DIN-rail and wall-mount designs * 48~56V DC redundant power with reverse polarity protection * Supports 6KV DC Ethernet ESD protection * -40 to 75 degrees C operating temperature SWITCHING * Hardware-based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-X * Features Store-and-Forward mode with wire-speed filtering and forwarding rates * IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation * 8K MAC address table size * 20Gbps switch fabric * 9K jumbo frame * Hardware-based DIP switch for “Standard” and “Extend” mode selection; the “Extend” mode features 30-watt PoE transmission distance of 250m at speed of 10Mbps * Automatic address learning and address aging SPECIFICATIONS HARDWARE SPECIFICATIONS * Copper Ports: 8 10/100/1000BASET RJ45 auto-MDI/MDI-X ports * PoE Injector Ports: 8 ports with 802.3at PoE+ injector function (Ports 1 to 8) * SFP Slots: * 2 1000BASE-SX/LX/BX SFP interfaces (Ports 9 to 10) * Compatible with 100BASE-FX SFP * Connector: * Removable 6-pin terminal block * Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 * DIP Switch: Standard/Extend mode (Extend mode for Ports 5 to 8 only) * LED Indicators: * 3 X LED FOR SYSTEM AND POWER: * Green: DC Power 1 * Green: DC Power 2 * Red: Power Fault Alarm * 8 X LED FOR POE COPPER PORT (PORTS 1 TO 8): * Green: LNK/ACT (10/100/1000Mbps) * Amber: PoE-in-Use * 2 X LED FOR 100/1000X FIBER PORT (PORTS 9 TO 10): * Green: LNK/ACT (100/1000Mbps) * Amber: 1000Mbps * 4 X LED FOR POE USAGE * Amber: 60W, 120W, 180W and 240W * Power Requirements: 48~56V DC, 6A (max.) * Power Consumption: * Max. 3.92 watts/13BTU@56V DC input (System) * Max. 7.28 watts/24BTU@56V DC input (Ethernet Full Loading) * Max. 251.2 watts/857BTU@56V DC input (Ethernet + PoE Full Loading) * Dimensions (W x D x H): 66 x 106 x 152 mm * Weight: 879g * Enclosure: IP30 metal case * Installation: DIN-rail/ wall-mount/side wall-mount * ESD Protection: 6KV SWITCH SPECIFICATIONS * Switch Architecture: Store-and-Forward * Switch Fabric: 20Gbps * Throughput (packet per second): 14.8Mpps@64bytes * Address Table: 8K entries * Buffer Memory: 4M bits on-chip buffer memory * Jumbo Frame: 9Kbytes * Flow Control: * Back pressure for half duplex * IEEE 802.3x pause frame for full duplex POWER OVER ETHERNET * PoE Standard: IEEE 802.3at Power over Ethernet Plus/PSE * PoE Power Supply Type: End-span * Power Pin Assignment: 1/2 (+), 3/6 (-) * PoE Power Output: * Per port 48~56V DC * Max. 30 watts * PoE Power Budget (max.): 240W maximum * Max. Number of Class 3 PDs@25W: 8 STANDARDS CONFORMANCE * Regulatory Compliance: FCC Part 15 Class A, CE * Stability Testing: * IEC 60068-2-32 (free fall) * IEC 60068-2-27 (shock) * IEC 60068-2-6 (vibration) * Standards Compliance: * IEEE 802.3 Ethernet * IEEE 802.3u Fast Ethernet * IEEE 802.3ab Gigabit Ethernet * IEEE 802.3z Gigabit Ethernet over Fiber Optic * IEEE 802.3az Energy Efficient Ethernet (EEE) * IEEE 802.3at Power over Ethernet Plus * IEEE 802.3af Power over Ethernet ENVIRONMENT * Temperature: * Operating: -40~75 degrees C * Storage: -40~85 degrees C * Humidity: * Operating: 5~90% (non-condensing) * Storage: 5~90% (non-condensing)